DESIGN AND CONSTRUCTION OF 1.5KW INVERTER

Simple item page
dc.contributor.authorMOHAMMED ABUBAKAR UMARen
dc.creatorMOHAMMED ABUBAKAR UMARen
dc.date.accessioned2023-09-22T06:00:34Z
dc.date.available2023-09-22T06:00:34Z
dc.date.issued2010-12-16en
dc.description.abstractThe project is about the development of 1.5 KVA DC/AC inverter. The circuit converts DC supply into AC stepped up voltage. It comprises of six units. These are the Oscillator unit which produces an alternating signal for driver. The driver is a buffer IC (CD 4050) to supply the dual alternating outputs responsible for switching on and off of the power transistor, the switching unit uses six power MOSFETs to switch on and off the DC voltage to be inverted, the transformer unit which is use to couple the voltage swings due to switching of the transistors at its primary center tap to a square wave. The low battery unit is used to monitor the battery voltage, the change over unit which changes the output supply from the inverter to mains supply and finally the charging system which charges the battery. The result is an input DC voltage inverted to an AC stepped up voltage.en
dc.identifier.urihttps://teras.ng/api/asset/document/93b2c35a-ef16-4909-95e1-862e281bfa35en
dc.identifier.urihttps://teras.ng/catalog-item/3e22d8b2-be01-4234-9c38-1d2ba8a0b1b9en
dc.identifier.urihttp://dspace.teras-network.net:4000/handle/123456789/26417
dc.publisherNuhu Bamalli Polytechnic Zariaen
dc.titleDESIGN AND CONSTRUCTION OF 1.5KW INVERTERen
dc.typeUndergraduate Thesesen
thesis.degree.levelHNDen
thesis.matric.numberH/EET/08/10327en
Files
Collections
Undergraduate Theses